I’m finally set up to be able to put a hollow grind on my edge tools. Slow speed grinder and 80 grit CBN. Here’s a picture of one of my first grinds (60 1/2 block plane).
91260E79-B130-4365-ADC0-E407D8363CA3.jpg
I know I need to work a little more on the micro-bevel. Question is, the 80 grit scratch pattern...it’s ok as long as the micro bevel has no scratches right? Being used to polished bevels, the scratches kind of bother me...but is there a reason it should? Do I need a higher grit CBN to smooth it out some?
Thanks!