I have mostly made up my mind that in the next year I will be purchasing either an Oneida or Clearvue 5 hp Cyclone. The only part I am getting hung up on is the collection bin sizes being so small. My dad has the Grizzly 5hp industrial dust collector which lists the collection bag size as 24 cu ft (~180gal) and when we are skip planing a kiln load of lumber we have to empty it mid way through the load. In my research I haven't found where people attach maybe four 55 gal drums to the bottom of the cyclone. I would be even happier to be able to make one very large bin that is on casters and that I could pick up with the forks on the tractor to be able to dump. Are either of these options possible or do they somehow interfere with the airflow of the cyclone making it not separate as it should? I have 14' ceilings and will run the duct work on the ceiling to all tools so I could raise the cyclone to accommodate any splitter off the bottom of the cyclone.