Results 1 to 8 of 8

Thread: Question about Lee Valley self cleaning blast gates

  1. #1
    Join Date
    Aug 2007
    Location
    Meridian, ID
    Posts
    99

    Question about Lee Valley self cleaning blast gates

    I know these work with PVC but will they work with metal ducts or QR ducts like Nordfab?

  2. #2
    I have some of these. They do not have the connecting collar shape but, can certainly be fitted by anyone handy. The Lee Valley neck is quite short and just barely accepts a hose clamp. I have several "adapted" to 6" PVC where I add a short 4" hose whip between machine and ducting.

    Here I have adapted the gate to a 6-to-4 reducer using a section of 4" irrigation pipe with a section removed to make it fit the inside dimension of the adapter. The gate neck then fits like a cork and is secured by a screw short enough to grab the gate but, not long enough to enter the airway.

    e-DC-Mod-Planer.jpgf-DC-Mod-Planer.jpgblast gate magnet 4.jpg

    I have other variations for different scenarios but, these pics were handy. You can see the short neck I describe in the last pic.
    Last edited by glenn bradley; 08-13-2018 at 12:15 AM. Reason: sp
    She said “How many woodworking tools do you need?”
    I said “Why? Do you know someone who is selling some?”


  3. #3
    Join Date
    May 2004
    Location
    columbia, sc
    Posts
    559
    My ductwork is metal 6” and all my blast gates are the LV self cleaning variety. Works fine
    Bob C

  4. #4
    Join Date
    Dec 2006
    Location
    Toronto Ontario
    Posts
    8,703
    I have them with metal ducting, they fit if you're using ducting you can attach with sheet metal screws..........Rod.

  5. #5
    Join Date
    Dec 2003
    Location
    SF Bay Area, CA
    Posts
    15,288
    Yep, they can work as Glenn alluded to. One thing not mentioned is that Lee Valley also has proper hose clamps that follow the spiral-ness of the hose and therefore clamp more appropriately.

    They call them Bridge Clamps:
    http://www.leevalley.com/us/wood/pag...=1,42401,62614
    Wood: a fickle medium....

    Did you know SMC is user supported? Please help.

  6. #6
    Join Date
    Jul 2012
    Location
    Punta Gorda, FL
    Posts
    2,156
    When we moved and I was planning how I'd set up the new shop, the first thing I did was toss the plastic blast gates. In their place I went with the LV self-cleaning gates. I am so happy I did.

    In this picture you can see three of the LV blast gates in line with standard 4" HVAC metal duct. The blast gates are just above the 4" flex. I used fiberglass reinforced metal tape to seal the 4" HVAC joints and the system works pretty well. I have yet to encounter a problem with the LV gates.

    “Travel is fatal to prejudice, bigotry, and narrow-mindedness..." - Mark Twain

    Diapers and Politicians need to be changed often... Usually for the same reason.

  7. #7
    They work very well with metal duct. The neck is slightly tapered for a tight fit. I used teck screws to secure the duct to the aluminum neck. No real need for tape even.

  8. #8
    Join Date
    Oct 2007
    Location
    Falls Church, VA
    Posts
    857
    Blog Entries
    1
    Gee, I’ve never had trouble with the aluminum blast gates from woodcraft.

    Even the plastic ones can be modified to reduce clogging. Just drill holes where the corner of the gate is when it’s closed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •