Hey there folks,
I'm looking at upgrading my bandsaw situation. Right now I've got a 14" Delta that's 3/4 HP and has about 6" of resaw capacity.
I know for certain I'll go with something more powerful (have my eye on the Rikon 10-326) , especially for resawing. But I was wondering how many of you go with two bandsaws: one larger more powerful saw for resawing, and another smaller, cheaper saw for cutting curves.
Of course I can go with one saw and just change blades. But time is my biggest limitation. The more time I can spend cutting and the less changing blades and calibrating, the better.
Anyone out there rock two bandsaws? How does a smaller bandsaw work out if all you are doing is cutting curves? Thanks in advance!