We're going to be renovating the bathroom soon (new vanity, granite, paint job and accessories) so I volunteered to make the first one. Here's the progress so far.
IMG_0236.jpg
The case is made with 20mm baltic birch and the face with yellow popular. I'm pretty much following Norm's procedure with this (dados, glue, and securing the face with biscuits).
IMG_0237.jpg
The inset door was made on the table saw. The measuring was a little finicky, but I think I got it to a pretty close fit. I still have to clean and sand it, and I'm hoping the paint will hide that tiny gap.
IMG_0238.jpg