Originally Posted by
Mike Delyster
I’m a little late to the discussion, but I’ve used the Felder/Hammer Safety Bar kit on a couple of shapers.
Not as handy as the Aigner, but not as costly either. I believe SCM all so make bars similar to these.
http://us.feldershop.com/en-US/en-US...ction-set.html
Here are a couple of pictures, I all so make breakthrough inserts to put in place of the bars similar to what Brent does.
This is what I love about SMC, even thread jacks bring tons of great information, that and it helps me spend my money, however, that part I usually don't have much trouble with...
You answered in a followup that they add the hardware to connect to a wood fence which is great and I was going to ask how much trouble it was. Plus with the tenon you can switch from fingers to breakthrough quickly and painlessly. Thanks for the post!!!
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.