So I have an 80 watt AP Laser. I user CorelDraw X8, Photograv 5, and lasercut 5.3. Lately I've been experiencing this issue on my engravings.
lasercut.PNG
Above is what it looks like simulated in Lasercut
engravechest.jpg
Above is what it looks like when engraved on granite.
I made test runs with the same photo on some tile and this did not happen. One time that it did happen previously I was able to invert the color in Lasercut and the "double" lasering went away.
It looks like this part of the engraving file has a second layer but it shouldn't.
Any ideas? Any help?