Results 1 to 5 of 5

Thread: Parker Arm Chair

  1. #1
    Join Date
    Jun 2017
    Location
    Landenberg, Pa
    Posts
    431

    Parker Arm Chair

    Does anyone know where I can locate a set of plans for replicating a Parker arm chair? Something like the attached image.4c374363c8cfc530533ca793becf0b9a--armchairs-couch.jpg

  2. #2
    I'd be surprised if you find plans for that chair but if you had access to one to take measurements from, it wouldn't be difficult to create plans.

  3. #3
    Join Date
    Jun 2017
    Location
    Landenberg, Pa
    Posts
    431
    I think I have it reverse engineered. Time to experiment - four parallelograms, a bandsaw, and then some router templates. I’m going to make a version of this one.
    Attached Images Attached Images
    Last edited by William Chain; 07-20-2018 at 10:36 PM.

  4. #4
    Would love to see it.

  5. #5
    Join Date
    Jun 2017
    Location
    Landenberg, Pa
    Posts
    431
    It’ll be a while. The prototype will be poplar. Once I have the templates right I’ll cut the walnut and teak.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •