Does anyone know where I can locate a set of plans for replicating a Parker arm chair? Something like the attached image.4c374363c8cfc530533ca793becf0b9a--armchairs-couch.jpg
Does anyone know where I can locate a set of plans for replicating a Parker arm chair? Something like the attached image.4c374363c8cfc530533ca793becf0b9a--armchairs-couch.jpg
I'd be surprised if you find plans for that chair but if you had access to one to take measurements from, it wouldn't be difficult to create plans.
I think I have it reverse engineered. Time to experiment - four parallelograms, a bandsaw, and then some router templates. I’m going to make a version of this one.
Last edited by William Chain; 07-20-2018 at 10:36 PM.
Would love to see it.
It’ll be a while. The prototype will be poplar. Once I have the templates right I’ll cut the walnut and teak.