I managed to get an update to the firmware for the rdc6442S but I don't know how to apply it
any one here done it
I managed to get an update to the firmware for the rdc6442S but I don't know how to apply it
any one here done it
Unzip it to a folder on your computer. With laser on, open rdworks. Click on config and then system settings and then tab system info. Click read button (don't need to input vendor password. If connected it should read in the current version of the firmware.
Then click upgrade firmware button and navigate to where you unzipped file. Click on file and it should upgrade in a few seconds. Machine should show upgrade successfully also. Reset and make sure update is there.
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
thanks , that's straight forward