Is there any way to make this safer/acceptable? I’m reorganizing my shop and making room for a new bandsaw. In doing so I realized the location of my dust collector is wasting space. Locating it under my gas heater is the most space efficient place for it but I see the obvious safety risks. When the filter bag is inflated it will come within inches of the exhaust pipe, which gets pretty hot. Eventually I plan on upgrading to a separator and Wynn filter, which may lower the total height of the unit, but can’t afford that at the moment. Also, I know the picture is sideways, can’t seem to change that. Thanks
56719430-9BFE-4E85-9743-01C8C90F92A7.jpg