Might be a relay or poor wiring if both aren't working. Sounds fishy that both would be bad Jerome.
I think I'd be taking them out (got to anyway, figuring out what voltage (120 or DC) and testing them. (unless you did, I didn't see where you posted any troubleshooting results) That really is one in a million if both are truly bad.
Last edited by John Lifer; 08-03-2018 at 7:03 PM.
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others