We are again visiting Montana and friends are about to complete the build of a beautiful home on the site that was once my sister's. To honour both them and my sister I would like to make a small box from a Pine Cone from at tree on their property. My plan is to place as large a Pine Cone as I can find under their tree in a container and fill it with epoxy and then turn it into a box. My question to you is will this work? Will the epoxy get into all the nooks and crannies or am I wasting my time. I do not have a pressure pot so will have to trust a thin type epoxy. Any suggestions as to the specific type of epoxy would also be appreciated.