Hi there laser community.
I know a lot of you have a great deal of experience with the various options out there and have been down these roads before me. Hoping to get a little advice.
What options you have found to replace/repair a Trotec ceramic laser tube? Mine's has a 120watt tube which is currently firing at about 38 watts.
I've been talking with my salesman and Trotec support which both are very responsive and great to deal with. Thanks to both of them!
We are still tracking down a few possibilities that might be the culprit...but more and more it's looking like its the tube. So I'm doing my research on viable paths forward.
The factory is quoting about $4200 for a new tube these days plus install.
not sure if there are any other reputable options. A few years ago I figured out that I could find lenses from other suppliers for quite a bit less than the factory price. All the tube threads I've read all seem to be about non ceramic tubes.
For reference - I've had my speedy 400 for 5 years. We replaced a tube at about one year under warranty.
Thanks for you help.
Bryce