Results 1 to 2 of 2

Thread: Large cone project

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2018
    Location
    Cookeville TN
    Posts
    338

    Large cone project

    This is a project I designed a long time ago and finally getting around to building it. When I turned the Gun Cabinet lamp it took a lot of testing and playing. Especially the mitered staves and glue up. This was the test piece I did to solve those problems. It was pretty nasty with glue joints slipping and misalignment. It did help me solve the problems and the Gun lamp came out excellent. Anyway I saved this piece with a project in mind hoping that I could turn past all the misalignment. I did. It's probably 1/2" or less in thickness in spots but that's OK for this project. Anyway I hope to complete it shortly. I have to stop and turn some bed posts for a friend and have the grandkids for the next 3 weeks so that will put this project off for a while. This is 45" tall, 32 compound mitered staves. 16" wide at the bottom and 5" wide at the top.
    Attached Images Attached Images

  2. #2
    Join Date
    Jan 2015
    Location
    Brentwood, TN
    Posts
    684
    Knowing John, that's probably only 2" long and photoshopped. Just kidding, John. I am quite sure it's the real deal.
    Last edited by Mark Greenbaum; 07-05-2018 at 8:07 AM. Reason: added notes
    Maker of Fine Kindling, and small metal chips on the floor.
    Embellishments to the Stars - or wannabees.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •