I understand wanting non ferrous, but a world of possibles in Steel would be available if you could put a high quality finish on it.
And probably lots cheaper.
Just an idea.
Marc
I understand wanting non ferrous, but a world of possibles in Steel would be available if you could put a high quality finish on it.
And probably lots cheaper.
Just an idea.
Marc
I'm pretty new here, not as as experienced as most. Please don't hesitate to correct me
Have an AL welding /machine shop put sides on this and true it up overall, etc.
'https://www.ebay.com/itm/VINTAGE-SOLID-ALUMINUM-FLAT-BELT-PULLEY-12-ROUND-X-3-WIDE-1-BORE-/183285845914
Lots of possibles here, but most are cast iron, more complicated to weld side flanges to.
'https://www.ebay.com/bhp/flat-belt-pulley
Last edited by Lee Schierer; 07-02-2018 at 12:49 PM. Reason: removed direct links to auction site
I'm pretty new here, not as as experienced as most. Please don't hesitate to correct me
You can buy just the spindle for a trailer wheel that would have the bearings and bolts to mount