Page 5 of 5 FirstFirst 12345
Results 61 to 71 of 71

Thread: Maybe of interest to some?

  1. #61
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    I really only do this for the toys!

    Quote Originally Posted by Ted Calver View Post
    Yup. It's a great build thread and an even better cool toys thread! Really enjoyable. Please keep 'em coming!

  2. #62
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    Yeah the ebony these HNT planes were made from is exceptional.

    Quote Originally Posted by Marshall Harrison View Post
    HNT?

    That is some beautiful looking wood.

  3. #63
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    I started the day getting top carpcass panel dominoed together.

    As always I did a dry run clamping the piece together. Everything went easy peasy and looked perfect. As a result I ďfiguredĒ the glue of would be a piece of cake.

    Well I was wrong. Once I put glue in those cardboard domino mortise the mdf turned to mush resulting in the dominoes sheering the walls of the mortise and pushing the waste to the bottom of the mortise and this not allowing for the joint to close.

    It took everything I had to remain calm and find a soolution before the glue setup. Lots of cruising insued and I had to continually tell myself to breath maintain my composeur or I was gonna loose the piece.

    Loosing the piece would had been a disaster as I have no more veneer. Anything I do have left is allotted to the project to finish it.

    BAF59156-CC6C-4198-8DF4-8ED3F6AB8BE1.jpg

    108FEB9E-940E-45E3-A362-32EBA9146072.jpg

    91208E74-1DBF-4321-8496-58C3938D1353.jpg

  4. #64
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    I then needed to fine tune the solid cherry top prior to assembly.

    I got a few Japanese Kanna a little over a year ago now. I spent the better part of a week setting them and all my chisels up. I have not used the kana much as they really do require a intimate understanding of the tool. I’m way to busy most of the time with actual work “not play work” to risk what I know my LN planes can do with ease.

    Today I took the risk, mostly on account of working with cherry and the Kanna be well suited to the task.

    I really gotta start using these tools so I can become more familur with them.

    735C65A3-9FC5-45BC-9565-6B5C22F3E147.jpg

  5. #65
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    Once that was done it was time to predrill my side panels for the army of screw that will hold this giant pile of mdf crap together.

    I used the domino to bore slotted the holes for the solid wood to to allow for movement. The top is secured on its far back side to the back panel with screws. The back panel is dadoed I not the carcass sides, this holds the top from being able to move backward within the carcass. The tennon of the top is cut short by 1Ē on both its front and back side allowing for the cross grain movement within the dado that holds the top.

    Bet you didnít think Timberlocks were gonna make an appearance in this build did you. Or wait you did donít you lol..

    473500DF-1079-4D19-B42E-259D34BED7B6.jpg

  6. #66
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    It was then time to finally start putting things together and making a box.

    And yes I know the grain is not a perfect wrap form the iside to back panels. As said I ordered butt matched veneer and didn’t get it.

    I also burned the midnight oil and started padding out the exterior of the side panels with 3/4 mdf to accept another full 3/4 side panel. With the interior panel being 1” I’ll fishish with a full 2.5” front exposure.

    I. Loathing how the heck I’m gonna veneer up the the whole exterior of the piece. I’d be tempted to use contact cement but as far as I know that is a big no no.

    If anyone has and insight they can offer to a high and fast tack veneer glue I could use that would be great. To date I have been using specialty veneer glue. I can’t remember the name or brand. It’s a powder and you mix it. Actually I ran out of that and started using the titebond veneer glue.


    6A2496F7-7F6E-4885-A22F-52F36249ED33.jpg

    729173AA-34F2-4D1E-B72A-D76E834D35E4.jpg

    4D2B8443-E325-476E-92B7-4386F0A79B13.jpg

    43E3FFF5-8DBF-46BB-8BCF-DFE9857E477E.jpg

  7. #67
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    So the race is on now. This thing has got to leave my house tomorrow morning. Yikes it’s 10:30 and I still have to wait for the last side panel to dry, de clamp, finish trim routing and then veneer the face of the whole thing.

    I’ll start by just posting pictures of the carcass all built without the exterior veneers. As the pictures show I used 1” mdf for the interior panels. That decision was driven by the hardwood I inlaid into the interior of the interior carcas sides for the tambour to travel it.

    Anyway this was followed by a build out with 3/4 x 4 mdf rips just glued then routed to copy the interior panels. I then glued up two solid or full 3/4 sheets and router those again to my previous work. Once this was done I felt like I had finally gotten somewhere. Still I knew I have a long way to go.

    Oops I didn’t get pictures of the project at this stage so I will share a picture of the next stage. As you see the carcass now has solid exterior side panels.

    CDD26D65-A788-4234-84D4-9811A5614B62.jpg

  8. #68
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    So the unit finishes at 53.625Ē wide. Somehow I missed ordering a sheet of veneerwith the grain running the long way. We built and whole kitchen and batch and another office for this project much of it qs cherry. I may have figured we would have a off cut left over. Well we did not so I had to improvise.

    We still had a bit of hardwood stock left so I decided the fastest and least expensive option was to make my own veneer. Having never made my own veneers before this sounded good in theory but I feared it might prove a disaster.

    I got through without any issues. It was actually quite easy and Iíll never hesitate to make veneer again. Iím sure my boss will not allow,it to just buying it but..

    I stared by jointing two sides then taking a slice off on my new MM S500P. Mana o man that saw aid a beast. I was slicing veneers with no feather boards no power feed no real supposition whatsoever other than my tow hand and getting slices I could rpeetible put a caliper on. Wow is all I can say, every time I,pony up big money for a high quality tool I think ďsee all you naysayers that say Iím nuts for spending big on toolsĒ good tools really are a dream to y]use and make a huge difference imop in frustration levels and this also quality of work.

    Anyway pictures..

    F21C1FAD-13E9-4FB7-AE11-ABD0CDDDD3F1.jpg

    078804C3-0141-4F65-B9D2-14C8A236C11B.jpg

    AB91E776-E878-420F-BBD3-3808FD4616E6.jpg

    Donít hate Iím not perfect. I see that seam and small lamination placed to the front of the carcass as apposed to the back. I also know I could have sized my veneer pieces accordingly asmto get equal size veneers.

    I and mishap when applying the glue. My veneer was hanging over the edge of my bench unknowingly to me and the downward pressure of roller split what should have been the front right corner. With glue already spread on the carcass top and 99% spread on this veneer and not a extra piece anywhere I had no choice. I spun the piece putting the split at the far back left corner and settled on that small slice of veneer being at the working side of the desk.

    This whole thing turned into a real panic as I had never worked with non paper back veneer before and my veneer started to roll up like a wacky tobaky cigaret. I was so on the verge of panic but I just stayed call got my veneer tape setup and taped the split back together. At this point I was sure I was screwed.

    Anyway I got the cowls and claps on took a deep breath, said a quick prayer ďIím agnostic lolĒ and moved onto the next task. I love the stress and nessesity to be able to refocus even under pressure building fine things can bring. Actually I love it and Iíd say it abount the only reason I do this other than $$$. Who am I kidding Iíd do this for free. As soon as I donít have challenge I get board and move onto the next thing. Here is to me continuing to find ways to challenge myself as a woodworker as 9m far from bored yet.

    DD8E204C-AE1F-484F-B207-C90D99FD0A99.jpg

    A1996161-7F1F-47F3-B190-085D2F73AF4C.jpg

  9. #69
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    With the top out of clamps I could start thinking about veneering my carcass sides. This was a piece of cake with the paper back veneer. Nothing to seam, nothing rolling up like a cigar yada yada. I will say I’m less than impressed with that fact you can see the paper backing where two sheets of veneer comes together.

    Another part of this project is all QS Euro syscamore and at the corner joints it looks like a faint black line against this bright white lumber. It’s just terrible imop but I’m also a perfectionist. Well I strive to be a perfectionist and I extreme;y picky. I admit my mistakes ,try to limit them, always fix them when I can but always notice the slightest screw ups.

    Yeah I know the veneer on the carcass sides runs at a crazy ark. I tried to straighten it out the best I could. Without getting into it let’s just say I did the best I could with the material provided.

    If you look closely you will see a tow of eyes about 3” form the back side of each panel. I didn’t have the width to cut these little black eyes out and if I straightened my lines out the panels would go from having those eyes on the panel to completely off. The desk does have to box cabinet style carcass that go wall to wall so the case I’d only really exposed 3: top to bottom along the front then from standard counter height 36” up. Still t]it was my option this was my best option. I’m also very disappointed that the butt matched custom order veneer payed up on the short was not even close to butt matched resulting in the grain not wrapping all the way around the piece without interruption. Not even close actually. Another reason to make my own veneer if I’m ever buiding for myself or my own client with deep pockets

    17A9A9CA-1209-45A0-B424-5719A602195D.jpg

    B32AAA54-A14D-4434-A0D2-2AA5B4317793.jpg

    I should be able to go take the other panel out of clamps by midnight, Jerezo boss nothing like putting the pressure on!
    Last edited by Patrick Walsh; 07-18-2018 at 11:05 PM.

  10. #70
    Join Date
    Jun 2008
    Location
    So Cal
    Posts
    1,962
    Somehow I missed this whole thread, I gotta stop staring at my shoes or something.
    Really nice work Patrick 👍
    Aj

  11. #71
    Join Date
    Feb 2015
    Location
    Beantown
    Posts
    788
    Thanks Andrew...

    Well I’m a failure, but I already knew that.

    1:21 and just out of the shower. If I tried to do the FF tonight I’d mess something up. The project deserves more consideration than that kind of recklessness imop. Probably not my boss though, I think at this point as long as it dine and the client is happy he could care less. I think that is always his reality though. I suppose I respect that though as the guy keeps me fed and in a nice life.

    Tomorrow is gluing tambour to backing then rebating the back till it works properly. Also moving it out of my shop and back to work and finishing the veneer work. I think I’m gonna make a veneer for the top rail being as previously mentioned I don’t hsbe s piece long enough at this point.

    Tired but not tired, gotta be up in 6 hours..

    D3068A05-8E56-4988-B6EE-D0B442959284.jpg

    CD363606-CBF4-424C-9069-46FEBE31643A.jpg

    AE4CB90E-25EC-47DF-BD87-6244BBBBE8D9.jpg
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •