Dewalt RAS Model 7739

[John Cultice]

New this forum, so this is my first posting. I have a RAS Dewalt 7739. Turned it on the other day, and before it came up to speed, it shut down. Single Phase, 2HP, Over Load Thermal Protection, Motor Number 122565-51. I've no idea where to even start. I've checked, switch is good. Got the back of the motor loose from the mounted part and checked the switch from there. Any and all ideas would be greatly appreciated. Thanks, John

[Ole Anderson]

Can't help you with the saw John, but welcome to the Creek!

[lowell holmes]

Google "trouble shoot Dewalt radial arm saw"

You will find resources.

[Stephen Rosenthal]

John,

I've got a 7790. Recently I joined Delphi Forums because they have a forum dedicated specifically to Dewalt RASs. Lots of very valuable information by devoted users. I'm sure someone will be able to help with your issue. Free and no hassle to join.

[John Cultice]

Google "trouble shoot Dewalt radial arm saw"

You will find resources.

Thanks for the response. I got it figured out and it was just a stakon in the motor. Couldn't find a 90 degree, so made the most of a straight sta kon.