A friend lost a walnut tree during Hurricane Irma and let me have a few pieces to turn, I turned this one green, about 3/8” thick, 14” wingtip to tip, 12” wide. Finished with polymerized tung oil.
Excuse the shop pics, I was rushing to get this one finished for a wedding present this past weekend and didn’t have time to setup the photo booth.
The sapwood from this tree has been VERY difficult to cut cleanly, I had more tear out on the wings than I would have liked. I’m struggling with sanding dust staining the sapwood.
Any tips would be appreciated.
Another ringed foot, I tried a couple of these recently. I like this one better than my last.
6C3C3A78-2187-42BA-A57F-C7E3EC68A2CD.jpg63EE69F2-4D8E-43E9-833A-3CBD292B29D2.jpg007D199F-ECA1-4365-88B0-AA9E1F87F201.jpg