Page 2 of 2 FirstFirst 12
Results 16 to 20 of 20

Thread: Veritas Rabbit Plane

  1. #16
    Join Date
    Aug 2007
    Location
    Dickinson, Texas
    Posts
    5,522
    I have both skew rabbet planes and the small plow plane. I treasure all three planes.

  2. #17
    I finally found and read the manual and I now see how the knicker is adjusted. I had it all set correctly this morning going by my own judgement but now I know how to readjust the knicker, not sure why I would want to but I can. Thank you.

  3. #18
    Quote Originally Posted by Richard Hutchings View Post
    not sure why I would want to but I can. Thank you.
    Normally you don't once you set it right. But i sharpen my nicker a lot because it is used heavily on crossgrain cuts and after repeated sharpening, I had to reset the nicker a tad.

    Simon

  4. #19
    Quote Originally Posted by lowell holmes View Post
    I have both skew rabbet planes and the small plow plane. I treasure all three planes.
    You have both the L & R skews? Lucky man!

    Simon

  5. #20
    Join Date
    Feb 2016
    Location
    Edmonton, Alberta
    Posts
    300
    I made a tool similar to Derek’s, and it solves the issue with the fence slipping. I made mine from Bubinga to match my plane tote and knob. Based on the ‘nut saver’ designed by A gentleman named Bern Carpenter in the UK. I believe he also sells his own, if you would prefer purchasing one.
    4BCF83F9-2B88-47BA-89DD-B88F859759C4.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •