Results 1 to 3 of 3

Thread: Practice run on Fibre Laser

  1. #1
    Join Date
    Aug 2017
    Location
    Darwin Australia
    Posts
    13

    Practice run on Fibre Laser

    This is a very first run after putting a new computer in the fibre laser "Good Bye XP " !!!

    https://photos.app.goo.gl/ZTHLy2YGKDf5R2Zy5


    chinese 60watt JPT fibre laser 180 x 180 mm workspace
    Last edited by David Gray; 06-26-2018 at 6:13 AM.

  2. #2
    David
    That's impressive. I don't need one of those machines but.........
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Gravograph IS400
    Woodworking shop CLTT and Laser Sublimation
    Dye Sublimation
    CorelDraw X5, X7

  3. #3
    oh yes you do

    I'm fixing to semi-retire in a year so I'm looking for LESS work instead of more, however- after 2 years with my 30 watt fiber, I'm seriously considering a 60 watt or higher machine, as it could eliminate about 70% of my rotary engraving. The laser wouldn't necessarily be faster for such tasks, but the setup ease, and not having to sharpen a laser beam... oh yeah
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE- make that FOUR now - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •