Originally Posted by
Ted Calver
You can always build your own out of wood, or metal. Mine uses 80/20 extrusions and Harbor Freight trailer jacks. I move the whole thing onto the driveway, level it off using the trailer jacks and go to town. It also doubles as a chainsaw mill. Presently good for 28" x 7'. Clean up using the leaf blower
Attachment 422758,
Attachment 422760,
Attachment 422762,
Attachment 422763
Ted, what a great set-up! Very thoughtful design indeed!
A couple things that I was concerned about when I read the OP's post, and which you have taken care of, was whether the OP was going to joint the wooden rails and how he would set-up the slap to optimize the minimum amount of material to remove to flatten the surface. You've obviously taken both into account.
Well done.
Thoughts entering one's mind need not exit one's mouth!
As I age my memory fades .... and that's a load off my mind!
"We Live In The Land Of The Free, Only Because Of The Brave"
“The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill