Any of you going to the Blade Show this weekend in Atlanta?
Any of you going to the Blade Show this weekend in Atlanta?
Universal 60w VLS6.60 w/ rotary
RayFine 30w MOPA
Corel X8, Photoshop
Fab shop with South Bend Heavy 10, Bridgeport 9x42, 185a welder and a multitude of supporting tools/equipment
I can't help but wonder what this has to do with Laser engraving???
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Many high-end knives have intricately engraved blades engraved/marked via laser.
700mm x 500mm Ke Hui KH-7050 Laser
80W EFR F2
S&A CW5000 chiller
Chuck style of rotary attachment
rp1.jpg
rp3.jpg
rp4.jpg
blade2a.jpg
-- I lasered this blade not long after acquiring the old 25w ULS (aka New Hermes Optima) in 2002, I was still learning to laser engrave,
and just learning Cermark- this was a white knuckle job to be sure!
That laser was almost 6 years old then, and my BIL engraves wood boxes in it about 8 hours every night. It's still fitted with the original lens
-the knife on the right, while the engraving's not as fancy, the knife is! Steve Ramos lives about 2 miles from me,
just a young guy, takes him about 6-8 months to make one of his knives, I've put his signature on every one he's made...
sr2.jpg
sr3.jpg
sr4.jpg
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
That is some awesome work Kev. Thanks for sharing it.
Bert.... you need to get out of the shop some my man. There is alot going on in the engraving world outside of cups and trophies.
Universal 60w VLS6.60 w/ rotary
RayFine 30w MOPA
Corel X8, Photoshop
Fab shop with South Bend Heavy 10, Bridgeport 9x42, 185a welder and a multitude of supporting tools/equipment
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Trey - Do you know if there are going to be any demonstrations or learning events targeted at lasering blades? Are you going to have a table/booth selling anything?
700mm x 500mm Ke Hui KH-7050 Laser
80W EFR F2
S&A CW5000 chiller
Chuck style of rotary attachment
Universal 60w VLS6.60 w/ rotary
RayFine 30w MOPA
Corel X8, Photoshop
Fab shop with South Bend Heavy 10, Bridgeport 9x42, 185a welder and a multitude of supporting tools/equipment