I just picked up a new-to-me Powermatic 719A mortiser. It was a smokin' deal, and came with a full set of unused Clico chisels and the rarer than hen's teeth honing tools for the same. Aside from a little dust from sitting around, it looks new. Cleaning is ongoing. I'd like to convert to 220V, and per the images in the manual and on the unit, it seems straightforward. I opened the switchbox, and indeed the leads are numbered and color coded and 1/3 are on one terminal on the switch, and 2/4 are on the other. Do these images mean I simply unbolt leads 2 and 3 from those terminals, tape together, and I'm done with that part? I have the new plug to go on the cord, that part is easy. Thanks for any advice. IMG_6278.jpgIMG_6279.jpg