Router recommendations

[Mike Manning]

I think it's probably beyond time for me to get a router and I'm hoping to get some recommendations from those of you with lots of experience. I'm just a hobby woodworker. These are the tasks I need/want to do and I believe a router would make doing said tasks easier:

• Rounding edges
• Cutting channels
• Adding nuances to picture frames

These are tasks I've done within the last year and will be doing again where I think having a router would have made them significantly easier. This will be my first router. I know that it also needs to have plunge capabilities to cut channels. I don't believe I need a router that is at the top end power wise as I don't see myself using it that hard on on things that I'd guess would require that kind of power. I'm most interested in ease of use, safety and reliability. Most of my tools are used so I don't mind going that route if it will save me money but at the same time getting quality. I suspect that the router probably isn't like my 1940s Delta woodworking machines where I can expect a 70-year old machine to work just as well as a new one.

Anyway, I'm looking forward to your recommendations.

Thanks!
Mike

[Peter Christensen]

Many companies have mid size routers (2 1/4hp) with barrel type motors that fit fixed and plunge bases. I have a Porter Cable that works okay but would probably get a Makita set if buying again. You just have to pick your favourite colour. Go to a Borg and look at a bunch of them then shop around or wait for a sale on the one you like.

[Mike Cutler]

I have Festools, Porter Cables, and a Milwaukee.
Even though I have the Festool's I really like the DeWalt's and the Bosch's. They both come in kit's with fixed and plunge bases. They're nice. I really like the Bosch 1617 kit. I might sneak a pair into the shop some day for use with a dovetail jig.
Routers are like rabbits, they should come in pairs. You really, really, really, want more than one. I promise.

[Peter Kelly]

There's an Elu 3338 plunge router on Ebay right now for a buy it now price of $150 shipped. I've got a little bit older version of the same, probably one of my favourite tools.

[John Sincerbeaux]

Festool 1010 is a great router for light-medium work. Super smooth and easy plunge and the ability to plunge w one hand is really nice. I have a lot of routers. The 1010 is my fav. The 1400 is a more powerful version but no way performs as nice as the 1010. It is too big and tall and the plunge is not as smooth as the 1010.

[Dave Sabo]

The DeWalt 611 will tick all the boxes you mentioned and won't cost an arm and a leg. Easy to handle and accepts standard template guides available everywhere.

http://www.finewoodworking.com/2011/...mbo-kit-review


If you're going to be cutting channels larger than 3/4" x 1/2" on a regular basis you might want to step up to a 2+hp router.

[Nick Decker]

Mike Cutler is right. You may not realize it yet, but you'll end up with more than one.

You might want to start with a smaller trim router, like the Dewalt 611. But you'll eventually find that you need more power. I also hate being limited to 1/4" shank router bits and avoid them whenever possible. IMO, the Bosch 1617 series is hard to best in the mid- power range.

I see a router table in your future...

[Jim Becker]

For a "first" router, I personally believe that one of the multi-base kits are the way to go so one has fixed base when it's most appropriate and plunge capability when that's required for the work...with one motor. That makes the acquisition cost reasonable. The multi-base kit I have features the Dewalt DW-618 motor which is a 12 amp (~2.25hp) router that can do good work, including swinging mid-size bits in a table setup if needed. (It's not appropriate for the largest cutters in a table, however) All the major brands have similar kits and motors available, so "pick your favorite color" and enjoy!

[Jon Snider]

Personally I think the small laminate trimmers, such as the Dewalt 611 or Bosch Colt (both of which I love) are a little too small for a do it all first router. But definitely next on the purchase list. The Bosch 1617 is a great choice, can use both 1/4” and 1/2” chucks. Has an optional plunge base. Std base fits almost all available special templates for things such a lutherie work, etc. But why stop there? Looking around in my shop I see a Makita 3 1/4 HP 280, another laminate trimmer Rigid which I can’t recall buying and rarely use, a Porter Cable 7518 in router table, and a Porter Cable 690? retired after a well used life. I think you’re getting the point. It’s a disease. But I for one am not yet ready to look for a cure.

Happy routing,

Jon

[Dave Sabo]

I agree with you guys that most people will end up with several routers - but did you buy them all at once ? Nope !

I also agree that a 2.25hp DW618 -or- 621, Bosch1617 or a PC890 kit would make a better all arounder if you're only going to have one router. But you're not. See above.

So, given Mike's stated needs - a trim type router kit would probably make more sense for his first router. It will be easier to handle and learn on than a "bigger" more powerful router yet it will easily put an ogee or roundover edge on even walnut. Which do you think will be easier to add nuances to a picture frame with ? Something liek the 611 will also do groves as long as you';re not trying to hog out 3/4" x 3/4" grooves in something like ipe'. And the 611 is very nice for inlays, much easier than any 2.25hp unit.

He makes no mention of raising panels or making moldings on a router table, something a lot of us end up graduating to. But it's rarely what we attempt out of the gate. If it is, most will tool up for that initially and then come back here looking for a rec on a good handling handheld router for edges and inlay work.

[Mike Manning]

Guys,
This isn't the first time I've considered buying a router and as I started to checkout some of the models suggested I recall what has kept me from taking the leap and buying one - the incredible amount of poor reviews for routers like the Dewalt DW618 and the Bosch 1617. I'm sorry but I am unable to pull the trigger on a product where the number of very low reviews approaches 20% (1 in 5!). With respect to the Bosch 1617 there are so many reviews complaining about the poor design of the motor casing and how it engages with the bases which leads to a lot of trouble removing the router motor when needed. Add to that all the comments regarding the Bosch about proprietary methods of operation that make it impossible to use other templates and such that are almost industry standard excepting Bosch and that every thing has to be purchased separately. I hate that kind of corporate arrogance! Anyway, it just made me remember why I haven't bought a router. Sigh.

On a good note, I did check out the Dewalt 611 review and the 1 & 2 star reviews combined totaled 3%. That's more like it IMO. It seems underpowered and I'm wondering how it would perform cutting a 1/4" x 1/4" x 12" channel in BB or cherry or walnut? And will it be able to cut coves should I want to add a nuance to a pic frame? Anyway, at this point, I think that's the direction I'm leaning.

Anything I should know about the Dewalt 611 before buying? Any add-ons I should be considering?

Any additional feedback, more recommendations, etc are appreciated.

PS
I overlooked checking out the PC890 suggested by Dave. A quick look and it appears that's an older model and no longer being made. By series, does Dave mean the current model like the 892? Which appears to have 15% 1&2 star reviews. Shaking my head but I'll read them to see where the problems like with this router.

Thanks,
Mike

[Jim Becker]

Mike...consider this: online reviews typically skew to the negative for almost anything because folks are more inclined to complain about an issue than they are to praise something that's satisfying. That's the reality of how people act.

[Mike Manning]

Mike...consider this: online reviews typically skew to the negative for almost anything because folks are more inclined to complain about an issue than they are to praise something that's satisfying. That's the reality of how people act.

Jim,
I understand that to some degree and that's why I actually read the reviews. Definitely a common thread with the Bosch 1617 which I mentioned. I'll have to go back and finish the reviews on the DW618. Also, how do you explain the only 3% negative reviews for the DW611? Just an anomaly or maybe a more reliable product? Blows your theory out of the water though. Just sayin'. ;-)

Mike

[Jim Becker]

Jim,
I understand that to some degree and that's why I actually read the reviews. Definitely a common thread with the Bosch 1617 which I mentioned. I'll have to go back and finish the reviews on the DW618. Also, how do you explain the only 3% negative reviews for the DW611? Just an anomaly or maybe a more reliable product? Blows your theory out of the water though. Just sayin'. ;-)

Mike

If I'm not mistaken, the DW611 is a relatively new model whereas the D618 has been on the market for a long time. That could partially explain the skewing. If I'm not mistaken, anecdotally, a lot of folks have liked the DW618 here in the SMC forums over the years. I'm not familiar with the Bosch, so I don't know if the design thing you mention is relevant, but I suspect such a specific thing being mentioned a lot probably has bearing.

In the end, you'll have to select the brand and model you feel most comfortable with and also buy it from a vendor that you feel will provide you with good service if you need it. I have multiple routers; the aforementioned DW618 kit, a PC 7518 "big butt" router in my table setup and both the Festool OF1010 and OF1400 routers. I also had a PC 7529 plunge router which is still in service at a friend's house...I gave it to him years ago. All of them have consistently performed well for me. I have zero regrets choosing any of them.

[Mike Manning]

I just caught that Dave Sabo mentioned inlay work. That is definitely something I have been thinking about. Could the DW611 handle that?