This would be replacing a 3hp 1999 Unisaw that I bought used on CL. I've added a sharkguard adjustable riving knife and the guard, never use the guard. It's also a 36" model. The adjustable riving knife is cool but a hassle to have to manually adjust it and make sure know to raise the blade and run it into the riving knife.

That said....

I'm going to look at a 5hp single phase Sawstop tomorrow evening. It's 12 years old. It is a 52" model so I'll need to cut down the rails OR store them and find a 36" rail set. Cheaper to cut them down likely.

I can sell my Unisaw for $1,000-$1,300 likely.

Getting it for $2,000.

Thoughts? Is it too old? I'm going to get shit from the fiance as we are in wedding planning mode but whatever can't pass the deal up.