[OP]
Contributor
For the past while I have had to adjust my settings considerably, power max and speed slow as the tube I figured was failing
This week during a cut it just quit, will not fire manually etc no arc
Is this the way they quit i thought it would just get weaker and weaker
is there any power supply voltage checks i could do to verify
the power supply has not failed
Contributor
In your own words you say it got weaker and weaker- there comes a point when the tube just won't fire, seems you found it...
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now- fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
[OP]
Contributor
yes ... thanks I just did not want any other component failing , like the power supply
Member
like some of my employees, without a written 2 week notice.......
Contributor
exactly why I have no employees-
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Posting Permissions
Reply With Quote