Results 1 to 3 of 3

Thread: IS400 Communication error

  1. #1

    IS400 Communication error

    I'm trying to reinstall the IS400 driver on an older machine that has usb-serial connection. When a job is sent over, it shows a transfer error. Any ideas? Thanks, Luann
    Luann Brainard- Backwoods Framing & Engraving
    Epilog 60 watt Helix/ 75 watt Fusion
    Corel-Draw x8
    Gravotech IS400
    Sandblaster
    Valliani Computerized Mat Cutter

  2. #2
    Probably a com port # error- first to try is plug into different USB ports on the computer-
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


  3. #3
    Join Date
    Mar 2008
    Location
    Savusavu, Fiji
    Posts
    1,167
    Not all USB-Serial(RS-232)converters are the same. Some will work when others do not. If you need a different COM port number for it to work, you can easily
    change the COM port number (and other parameters) in Device Manager [click on "Ports(COM-LPT)" then Properties].
    Longtai 460 with 100 watt EFR, mostly for fun. More power is good!! And a shop with enough wood working tools to make a lot of sawdust. Ex-owner of Shenhui 460-80 and engraving business with 45 watt Epilog Mini18.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •