I've ordered a new Supermax 16-32 sander and am expecting it in early May. Until now, I have used a 1 hp HF Dust Collector that I move between my cabinet table saw and my miter saw. I also run a Jet air filter. I do not utilize dust collection on my 15" planer as it was purchased used with the collector hood missing and I've just never done anything to replace it. I know I need DC with the sander. Will I get away with my current setup (I don't think so), should I up grade to a larger DC and leave it portable, do I need to go to a full blown ducted system? Please share your experiences. PS. The TS, planer and sander will all be mobile and when in operation be located in the same spot, so even a ducted system would only have one outlet. Thanks for you input.