I would like to make decals of my logo for my equipment, and I'd like to use my laser to cut it out.
My logo is one color, but quite detailed, I want to make something like the stick figure families you see on car windows. My thought is to find a pressure sensitive vinyl that comes with the adhesive bonded to aluminum foil. It would be foil:adhesive:vinyl. I would cut the vinyl with the laser, not cutting the foil. The foil would hold the decal together while I separate out the bits I don't want. Then, apply transfer tape to the top of the vinyl. When I apply the decal, pull off the foil, apply, then pull off the transfer tape.

Does something like this exist, or is there a different method or materials I can use?