Road trip today, stopped at a little place in Brandt, OH...picked a pair of chisels ..for $5 total
IMG_3701 (640x480).jpg
Longer one is 3/4"..shorter one is 1" wide...But, there was a couple things I like about the short chisel
IMG_3702 (480x640).jpg
Although both seem to be firmer chisels, the 1" wide one has a "cranked neck" and has an etch on the socket.
MFD By UNION Hardware Company, Torrington , CONN, USA
The longer one's back is flat, the top of the chisel is tapered. Looks like I'll need a couple handles..
IMG_3703 (480x640).jpg
Will have to get rid of that mushroom, and the wooden plug....no biggie..
Tool ID:
IMG_3705 (640x480).jpg
I have had this 8" pair of dividers awhile, still haven't figured out who made them
All I can make out is a "Tool MFG CO"
IMG_3706 (640x480).jpg
Details. Has a fine adjust device. Arc is a bit worn from use. Has brass washers at the pivot.
Any clues?