Results 1 to 4 of 4

Thread: Blum hinge question

  1. #1
    Join Date
    Nov 2006
    Location
    Islesboro, Maine
    Posts
    1,268

    Blum hinge question

    I have to make a few cabinet doors to match what is already there. These doors are 3/4" thick and have a rabbet on three edges. On the butt, top & bottom. The rabbet is 1/4" deep & 1/2" wide. Do they make a Blum hinge that will work. The door insets into the face frame by 1/4"...I've either done inset of overlay but never had to do this before...will Blum hinges work for this application or should I be looking for something else?

  2. #2
    Join Date
    Oct 2007
    Location
    Whidbey Island , Wa.
    Posts
    914
    A2332A2C-D7F5-464A-9A16-F755F29BBA53.jpgRockler sells a Salice brand hinge that worked for 3/8” rabbited doors :

    They’re no Blum brand hinge, and I’ve never used them, but they are available.

  3. #3
    Join Date
    Aug 2011
    Location
    New York, NY
    Posts
    2,203

  4. #4
    Join Date
    Mar 2012
    Location
    Napa Valley, CA
    Posts
    916
    The Blum 155* hinge (71T7600N) can be used on a lipped door.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •