I have a Shop Fox W1820 (aka Grizzly G0691) cabinet saw that I would like to add a fold-down outfeed table to. Lack of floor space prevents me from using a traditional cabinet-type outfeed table. I have been using a stand-alone roller stand which always seems to be just the wrong distance away from the rear of the saw and always just the wrong height.
The options are to either buy a typical frame-and-rollers commercially made outfeed table such as the one Grizzly sells, or build my own. I'd rather build my own but if the commercially available one is superior, I'd have no issues with buying it. What would you recommend, and if you built your own, how did you do it and how well do you like the results?