Cant figure out how to rotate image. Been looking for a big spoil board cutter but cant swing the Vortex numbers. Pulled the plug on a steal deal on this thing last week and it landed yesterday. What a monster advance. We surface spoil board often (work with a lot of small parts) and do a lot of solid wood slab and glue up flattening. Have been struggling along with a smaller amana cutter (that is going to be up for sale cheap if anyone is interested) and fell on this thing for cheap money. My gosh. Running wide open at 600ipm and 7500rpms this thing leaves a finish that is 150 grit and done. What a major leap forward. I cant fathom running it at 12K rated but wow. Surfacing spoil board is now about 6 minutes and the MDF is dead flat and smooth with barely any visible pattern.
20180315_163418.jpg