I've read and read but am still confused. I'm 72 yrs old and in 2016 I spent a semester at the local Vo-Tech CNC program. I'd been learning on my own for the previous 5 years and its was very helpful with one exception. The program they used, Solid Works, gave me LOTS of trouble and that's the only reason I didn't return for the 2nd"year/semester". Fast forward to the present and I'm really intrigued by everything you folks do and would like to give it a shot. Any input would be welcome. I've ordered a more robust computer with good graphics capability so the hardware is covered. I plan to build a 24 x 40 building very soon but if I could use the next 60 days to get past the initial shock of the software that would be good. I'll also mention that I've considered FS Lasers only because "supposedly" their software will "work" with anything you can print. OK I hope I'm not asking too much and wasting your time. I'll continue to read and perhaps a light will come on!
P.S. If Corel Draw is THE solution then which version? The money isn't the issue if that's what it takes.