There's some kind of weird temporal vortex around Kev's house.
That's my story and I'm sticking to it.
There's some kind of weird temporal vortex around Kev's house.
That's my story and I'm sticking to it.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Is Kev's Head OKHe done a lot of knockin on it lately ?
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
The problem with 445's is folks look at them and think, "oh it's only 1 watt" but in that wavelength that 1 watt will blind permanently before the user can blink. At least stuff like circular saws and planers etc *look* dangerous, some of these Chinese 1 watt gizmo's look like toys and a few folks will treat them like toys then wonder why the world has gone black
You did what !
The GCC as Gary says is 30 watts, the rebuilt tube in the little ULS is 25 watts (but tested at 31, I even got a printed graph of the test ), my LS900 is 40 watts...
And ironically, 80%+ of the time these machines run they're doing raster duty, they don't cut much, and even less since I got the Triumph. The irony is I always assumed cutting was harder on the tubes, but Dave says the opposite is true due to the constant on/off pulsing that goes on when rastering, which makes sense...
And just an FYI, one of the times the LS900 WAS cutting, the fly in my avatar was walking around inside the cabinet... notice he's missing a wing?
Temporal Vortex, lol... Sounds too much like a fancy toilet
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Goog point