-
Time for a quick update.
I met with my friend to review some ideas. I determined that when assembled the table will always be covered by a tablecloth. This makes the design much easier as I can use bolts - nuts with big washers to connect the legs.
I also found that the area the table will be setup is not one hundred percent level. They try not to bump/move the table because they have it leveled with matchbooks. I’m going to add mechanical levelers to the design.
Thanks for the ideas - Frank
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules