Any suggestions for how to make a wall hanger for large bowls (18-21"). I would prefer not to buy one but want it to look nice and not cover up the rim. I will need about 3 hangers.
thanks,
Dave
Any suggestions for how to make a wall hanger for large bowls (18-21"). I would prefer not to buy one but want it to look nice and not cover up the rim. I will need about 3 hangers.
thanks,
Dave
How about metal strips (1"wide x 1/8"thick?) that are bent to the bowl shape and hook over the rim. Depending on your decor, brass or black iron might look good.
_______________________________________
When failure is not an option
Mediocre is assured.
thanks Dennis, I may give that a try.
Search for plate display hangers, and you can get some ideas.
Maker of Fine Kindling, and small metal chips on the floor.
Embellishments to the Stars - or wannabees.
thanks Mark, I did that before I made the post. Couldn't find anything that jumped out at me
I’ve seen a simple copper wire brought around a foot on a bowl, then wrapped around a small dowell; turn the dowel to tighten the wire loop snug to the foot, withdraw the dowl and you’ve got a hanger for a single nail (or whatever) for hanging on the wall. Easily reversed/removed, yet secure hold. Always wanted to give it atry - let me know if it works out...