Results 1 to 5 of 5

Thread: Seam Ripper display

  1. #1
    Join Date
    Jul 2009
    Location
    West Boylston Massachusetts
    Posts
    617

    Seam Ripper display

    Hello, I have been invited to sell some Seam Rippers at a local fabric shop. I was asked to make some sort of display. I am thinking of about 4 to 5 on display at a time. I have a couple ideas, any suggestions would be welcomed.
    Thanks in advance, Kevin

  2. #2
    Join Date
    Jun 2009
    Location
    Kerrville, TX
    Posts
    64
    You might consider looking at Ruth Niles bottle stopper site. In the gallery there are several display examples that should work fine. If you like those you might search for bottle stopper displays.

  3. #3
    Join Date
    Dec 2009
    Location
    Vadnais Heights, MN
    Posts
    1,610
    I use an acrylic display that holds about 10 seam rippers. It rises at an angle from the table. I think it came from CraftsuppliesUSA and is designed to hold pens.
    Last edited by Doug W Swanson; 02-25-2018 at 7:12 PM.

  4. #4
    Join Date
    Nov 2006
    Location
    TX, NM or on the road
    Posts
    845
    I had a display that was about 16" square, plywood bottom with 1x4's for the sides. The top was a piece of Plexiglas that had hinges on it. The inside we stuck some cloth to the bottom and sides. The seam rippers were laid at random along with pens and some bottle stoppers.

  5. #5
    Join Date
    Feb 2007
    Location
    Inver Grove Heights, MN
    Posts
    767
    I like the acrylic displays. If you make a display out of wood keep it light and simple so as not to overpower the seam rippers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •