Hello,
Still very new to the world of CNC and I am not sure what parameter should I change to eliminate this problem. BTW what is terminology for this kind of effect.
Here it is what I am using and my settings in VCarve:
bit: Onsrud 52-240 1/8 Upcut DE
Wood: Maple
Pocketing 1/2" using "Offset" and "Climb"
Pass Depth: 0.125
Spindle Speed: 16000
Feed Rate:160
Plunge Rate:30
Any help will be appreciated
IMG_5106.jpgIMG_5107.jpgIMG_5108.jpgIMG_5109.jpg