Alright i got my roll of formica, got my t-tracks but still kicking around the ideal of using t-tracks for my router fence or end clamps. The base I am going to use a 55 gallon steel drum since I am limited on storage on my tools (I work from my deck) and going to make the router top detachable to where I can store it inside my shed. My top will be 24x32 size. The fence will be made out of some type of hardwood with adjustable faces. Now I am planning on making the top setup where it will be easy for me to beable to adjust the router up and down manually and also provide support to the top it self.
Now the plywood I got is the 3/4" sanded plywood not birch and it is smooth on both sides it is flat and everything but just wondering if I should go with birch plywood. I am planning on doing 3 layers and 1/4" pinewood as banding material around the sides.
Waiting on good weather again to work on deck, alot of rain so far.