This is another piece of Norway Maple. It is 15 across and about 3 1/2 deep. It has a closed rim with two small beads on it. This form is more challenging to turn with a consistent thickness. It is about a 1/2 thick. The finish is a mixture of danish oil and polyurethane. It has a little spalt on the apex of the wall and a fair amount of curly figure. Cutting under the rim was done with a 1/2 spindle gouge with swept back wings and a 70 degree nose. This gouge allows pull cuts and push cuts leaving a clean surface.
D670AC33-4567-4F90-9A24-C127635867F5.jpg 8EBF3CB6-81AE-4BDC-9242-AFEFC64990FC.jpg