Results 1 to 6 of 6

Thread: Hinges for a drop-leaf table

  1. #1
    Join Date
    Mar 2014
    Location
    Los Angeles
    Posts
    1,366

    Hinges for a drop-leaf table

    I lost the hinges to a drop leaf table I refinished, and can't find anything online. Doesn't help that I don't know what I'm looking for.

    Any chance one of you might know what I need by looking at the few photos here?

    IMG_4917.jpg IMG_4908.jpg IMG_4915.jpg IMG_4916.jpg

    Thanks!
    Mark

  2. #2
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,797
    These may not be identical, but you can likely retrofit with a little attention to detail:

    http://www.leevalley.com/us/hardware...=3,41241,41261
    --

    The most expensive tool is the one you buy "cheaply" and often...

  3. #3
    Join Date
    Mar 2012
    Location
    Napa Valley, CA
    Posts
    916
    Maybe these?

  4. #4
    Join Date
    Mar 2014
    Location
    Los Angeles
    Posts
    1,366
    Thank you both for the suggestions. Jim's look the part, I ordered them.

  5. #5
    Join Date
    Mar 2012
    Location
    Napa Valley, CA
    Posts
    916
    Quote Originally Posted by Mark Gibney View Post
    Jim's look the part...
    Hmmm. I'm sure you can make those work, but I still think these are closer to your originals:

    drop_flap_hinge_h417lsm.jpg

  6. #6
    Join Date
    Mar 2014
    Location
    Los Angeles
    Posts
    1,366
    Jerry you of course are right. I did in fact order the one's you suggested, not Jim's. That was a typo on my part. Thanks again!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •