Hey guys,
I've built a cabinet for a company. It's a live action escape room business.
This cabinet will contain several screens and interactive electronic control systems
There are many seams and exposed plywood edges.
The owner would like the whole thing to look like one solid piece and is keen on using bondo all purpose or similar putty on entire surface.
This is for two reasons.
1) Hide seams
2) Durability.
Being that these rooms see a lot of traffic and abuse,
Alot of their older props are really showing wear and they'd like to increase lifespan.
So the question is if I were to cover these srams and edges with all purpose putty,
Is it flexible enough not to crack with heavy use AND
Would skim coating the entire cabinet do anything to increase durability and prevent little dents and scratches.
Also, props for building cabinet with all these angles are appreciated