Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19

Thread: Making dust pickups, adapters etc

  1. #16
    Tom, can you draw what you have in mind?

    I've been looking into this myself as 1.) I'm cheap; 2.) I'm using a shopvac (albeit very good shopvac) for dust collection.
    I'm tempted to make one out of pine and shape it by rasp and chisel.

  2. #17
    You can make things out of plexiglass, cut it with a coping saw,or jig saw, just remember to make cuts slowly, bend it with a heat gun, and glue it together at corners with fiberglass resin.

  3. #18
    Join Date
    Sep 2005
    Northern virginia
    I know this is a stale thread but I have been making holsters out of Kydex. Kydex is a poly vinyl material that is supplied in sheets and is a thermoplastic. Heat in a toaster oven, regular oven ( if the wife allows...some odor ) or locally apply a heat gun until it reaches appooximately 325 degrees F. When plyable mold over a buck or by hand with gloves and cool quickly with a cold wet rag. Material is available in different thicknesses and is durable. It can be glued using pvc plumbing glue. If I needed a custom fitting, it is what I would use.

  4. #19
    Hey Joe,

    Great idea!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts