Page 2 of 2 FirstFirst 12
Results 16 to 17 of 17

Thread: Making dust pickups, adapters etc

  1. #16
    Tom, can you draw what you have in mind?

    I've been looking into this myself as 1.) I'm cheap; 2.) I'm using a shopvac (albeit very good shopvac) for dust collection.
    I'm tempted to make one out of pine and shape it by rasp and chisel.

  2. #17
    You can make things out of plexiglass, cut it with a coping saw,or jig saw, just remember to make cuts slowly, bend it with a heat gun, and glue it together at corners with fiberglass resin.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts