I’ve had these shop cabinets in mind for years. They’re installed under an old workbench that I’ve had for quite a while. There were definitely some challenges getting them installed - due to me not considering the bench foot design sufficiently (I measured at top and ignored the bottom where the feet curve inward).
- Prefinished plywood boxes
- Blum Metabox drawer runners
- Maple and Machiche drawer fronts, doors, and handles
I built the doors - including resawing the Machiche panels.
Same on the pulls. They have a very shallow dovetail cut on the front for labels.
6493611C-45F5-41DA-83AA-904C9027CD9C.jpg