A friend bought some hardwood from someone downsizing their shop, and he was telling me about a Laguna bandsaw that's also for sale. It's the 18" Resaw Master with the mobility kit and Resaw King carbide blade. The owner bought it about 10 years ago to mill logs into lumber, and after sawing one log realized it was the wrong tool for job. It been sitting unused for 10 years, and unfortunately there must be a leak in the barn roof because my friend said the table has heavy rust on it. I was considering going and looking at the saw, but I have some concerns about it. It sounds like the table is so rusty that there's probably pitting, and who knows what else might be rusty. If the carbide blade has been tensioned on the saw while it sat for 10 years (not sure if it has been or not), then the tires could have flat spots and the blade and motor belt could have a set in them. Are there any other possible problems to look for? With all of this in mind, what might be a fair price for the saw?