I'm slowing making 17 doors for the kitchen cabinets at a rental.
Whenever the weather cooperates, I do a little work on them.
Come Spring - or even earlier now that I have a dozen of them put together - I want to paint them.
In the past when I did this it was easy since I had the whole inside of the empty rental house to stage the doors & keep track of which door went with each opening.
Now however - the doors are stacked in the corner at my house & the cabinets are miles away at the rental.
I have each door identified - "A", "B", "C" to match the diagram of the carcasses - but - once I paint them, I'll paint over the pencil marks.
The cabinets are circa 1955 and were built in place - so -each opening is a slightly different size - nothing is standard.
I'm thinking ( I know a dangerous thing!) that I can mount the hinges then take them off and mark each door under where the hinges will go.
I'm afraid if I just stick a piece of masking tape on it's going to fall off - - or worse yet - - stick so tight it won't come off after a couple months.