Results 1 to 9 of 9

Thread: Wood Choice for Crib

  1. #1

    Wood Choice for Crib

    My wife and I are expecting our first child and I am considering building a crib similar to the attached picture. Most of my wood working experience consists of plywood with a hardwood frame. However, this project looks to be a great deal of hardwood and was looking for your expertise in choosing a good wood. I don't have the option to spend a fortune on this project but I do realize that the materials alone will cost more than going to buy a crib from a big box store. Any suggestions on a lumber choice that is reasonably priced yet provide a crib that I could be proud to build. The crib will get a darker stain and I don't even want to say it but the wife may end up doing a white wash as well.

    Capture.JPG

  2. #2
    Congratulations! Of course your wife doesn't want a gloomy crib. And I would go the legal max on slat spacing . Film Noir
    style is not for babies. And the back should be slatted too,then,with the slats a few inches from the wall there will be entertaining light and shadows! I would use soft pine. NorthEastertern white pine is my favorite.

  3. #3
    Join Date
    Sep 2013
    Location
    Carrollton, Georgia
    Posts
    1,815
    My 2¢ : Ash is a pretty inexpensive, workable, strong and attractive wood, whether finished or painted, in my opinion.

  4. #4
    Modern store bought cribs usually have a plastic teething strip on the rail tops. If you don't want to use a modern material for that in order to avoid a factory look ,you could use a soft wood in that one place

  5. #5
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,593
    Blog Entries
    1
    Soft maple is a good choice for a crib and not terribly expensive. You don't say where you are located, which would help identify local hardwoods for your project. I would stay away from pine as it tends to be soft and will dent easily. Be sure to read up on the proper safety precautions to observe when building a crib, there are many changes that are essential to proper construction and operation to keep your child safe. Most hardwood suppliers will have better quality material and lower prices than the big box stores for hardwood.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  6. #6
    I'm located in North Dakota. Thanks everyone for the input and ideas.

    Quote Originally Posted by Lee Schierer View Post
    Soft maple is a good choice for a crib and not terribly expensive. You don't say where you are located, which would help identify local hardwoods for your project. I would stay away from pine as it tends to be soft and will dent easily. Be sure to read up on the proper safety precautions to observe when building a crib, there are many changes that are essential to proper construction and operation to keep your child safe. Most hardwood suppliers will have better quality material and lower prices than the big box stores for hardwood.

  7. #7
    Join Date
    Dec 2012
    Location
    Bedford, NH
    Posts
    1,286
    Soft Maple would also be my choice.
    Thoughts entering one's mind need not exit one's mouth!
    As I age my memory fades .... and that's a load off my mind!

    "We Live In The Land Of The Free, Only Because Of The Brave"
    “The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
    "
    Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill

  8. #8
    Join Date
    Dec 2004
    Location
    Cincinnati, OH
    Posts
    924
    Congratulations! As Yonak suggested, ash is less expensive than most hardwoods. It works very nicely and the grain resembles red oak. Nearly all who comment on the kitchen hutch I made identify the wood as oak.
    Rustic? Well, no. That was not my intention!

  9. #9
    Join Date
    Apr 2017
    Location
    Michigan
    Posts
    2,758
    I'm with Yonak on this one. Ash would work great and you can leave it unfinished. If it gets chewed on,,,well it'll take it and will not be poisonous.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •